• 2T 1L

    7,95€
    1 liter Naja 2T oil. Naja 2T MIX is a synthetic based ANTIPOLLUTION oil for all 2T engines, air or water cooled. Specially formulated for the new generation of 2T engines for all types of motorcycles. Special for premix and separate greasing. Properties:
    • Maximum power developed.
    • Reduces engine wear.
    • Prevents the formation of carbonaceous residues.
    • Extends the life of spark plugs.
    • Safety of operation in all regimes.
    • Minimal smoke formation.
    Characteristic:
    • Shiny and transparent appearance.
    • Bluish green colour.
    • Density at 20 ºC, gr/cm 3 0.87
    • Viscosity at 100ºC, cSt 8.5
    Applications:
    • Naja 2T MIX, is used to mix with gasoline, it lubricates the cylinder and piston walls, drastically reducing friction in the combustion chamber and preventing the engine from seizing up.
    Dosage:
    • The proportion of the mixture of gasoline and oil will depend on the recommendations of each engine manufacturer, it is usually used between 1 and 5%. Therefore for 5 liters of gasoline we will add between 50 and 250 ml. of Naja 2T MIX oil.
    Specs:
    • API TC+ / JASO FD
    • ISO L-EGD
  •

    2T PRIME 1L

    13,95€
    Naja 2T Prime oil of 1 litre. Naja 2T Prime is a 100% synthetic oil for all 2T engines, air or water cooled. Specially formulated for competition engines. Properties:
    • Greater acceleration and power.
    • Maximum protection against engine wear.
    • Prevents the formation of carbonaceous residues.
    • Extends the life of spark plugs.
    • Safety of operation in all regimes.
    • Minimal smoke formation.
    • Extraordinarily clean combustion.
    Characteristic:
    • Shiny and transparent appearance.
    • Red color.
    • Density at 20 ºC, gr/cm3 0.88
    • Viscosity at 100ºC, cSt 10
    • Viscosity at 40ºC, cSt 61
    Applications:
    • Naja 2T Prime is used to mix with gasoline, it lubricates the cylinder and piston walls, drastically reducing friction in the combustion chamber and preventing the engine from seizing up.
    • For premix 2T engines and also for separate greasing.
    Dosage:
    • The proportion of the mixture of gasoline and oil will depend on the recommendations of each engine manufacturer, it is usually used between 1 and 3%. Therefore for 5 liters of gasoline we will add between 50 and 150 ml. of Naja 2T Prime oil.
    Specs:
    • API TC+ / JASO FD
    • ISO L-EGD
  •

    4T 10W-40 1L

    10,95€
    Naja 4T 10W-40 oil of 1 litre. Naja 10W40 Synthetic is the new synthetic lubricant, formulated with highly lubricious synthetic and polymeric bases and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    Characteristic:
    • Viscosity grade 10W-40
    • Density at 20º C, gr/cm3 0.87
    • Viscosity at 40ºC, cSt 86
    • Viscosity at 100ºC, cSt 13
    • Viscosity index 150
    • Flash point, ºC >190
    • TBN 6.6
    Applications:
    • Naja 10W40 Synthetic, meets the latest requirements of the new 4-stroke, direct injection and multi-valve gasoline motorcycle engines.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  •

    4T 10W-40 4L

    39,95€
    Naja 4T 10W-40 oil of 4 liters. Naja 10W40 Synthetic is the new synthetic lubricant, formulated with highly lubricious synthetic and polymeric bases and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    Characteristic:
    • Viscosity grade 10W-40
    • Density at 20º C, gr/cm3 0.87
    • Viscosity at 40ºC, cSt 86
    • Viscosity at 100ºC, cSt 13
    • Viscosity index 150
    • Flash point, ºC >190
    • TBN 6.6
    Applications:
    • Naja 10W40 Synthetic, meets the latest requirements of the new 4-stroke, direct injection and multi-valve gasoline motorcycle engines.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  • Sin stock

    4T 10W-50 4L

    44,95€
    Naja 4T 10W-50 oil of 4 liters. Naja 10W-50 100% Synthetic is a new synthetic lubricant, formulated with 100% synthetic bases - high lubricity esters and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    • Especially suitable for competition motorcycles.
    Characteristic:
    • Viscosity grade 10W-50
    • Density at 20º C, gr/cm3 0.86
    • Viscosity at 40ºC, cSt 119
    • Viscosity at 100ºC, cSt 17
    • Viscosity index 160
    • Flash point, ºC >190
    • TBN 6.6
    Applications:
    • Naja 10W50 100% Synthetic, meets the latest requirements of new 4-stroke engines, direct injection and multi-valve gasoline motorcycles.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  •

    4T 10W-50 OFF-ROAD 1L

    14,95€
    Naja 4T 10W-50 Off-Road Oil 1 liter. Naja 10W50 100% Synthetic is a new synthetic lubricant, formulated with 100% synthetic bases - high lubricity esters and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    • Especially suitable for competition motorcycles.
    Characteristic:
    • Viscosity grade 10W-50
    • Density at 20º C, gr/cm3 0.86
    • Viscosity at 40ºC, cSt 119
    • Viscosity at 100ºC, cSt 17
    • Viscosity index 160
    • Flash point, ºC >190
    • TBN 6.6
    Applications:
    • Naja 10W50 100% Synthetic, meets the latest requirements of new 4-stroke engines, direct injection and multi-valve gasoline motorcycles.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  • Sin stock

    4T 10W-50 OFF-ROAD 4L

    44,95€
    Naja 4T 10W-50 Off-Road Oil 4 liters. Naja 10W50 100% Synthetic is a new synthetic lubricant, formulated with 100% synthetic bases - high lubricity esters and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    • Especially suitable for competition motorcycles.
    Characteristic:
    • Viscosity grade 10W-50
    • Density at 20º C, gr/cm3 0.86
    • Viscosity at 40ºC, cSt 119
    • Viscosity at 100ºC, cSt 17
    • Viscosity index 160
    • Flash point, ºC >190
    • TBN 6.6
    Applications:
    • Naja 10W50 100% Synthetic, meets the latest requirements of new 4-stroke engines, direct injection and multi-valve gasoline motorcycles.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  •

    4T 10W50 1L

    14,95€
    Naja 4T 15W-50 oil of 1 litre. Naja 15W50 is the new synthetic lubricant, formulated with highly lubricious synthetic and polymeric bases and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    Characteristic:
    • Viscosity grade 15W-50
    • Density at 20º C, gr/cm 3 0.86
    • Viscosity at 40ºC, cSt 140
    • Viscosity at 100ºC, cSt 18
    • Viscosity index >140
    • Flash point, ºC >190
    • TBN >7.5
    Applications:
    • Naja 15W50, responds to the latest requirements of the new 4-stroke engines, of direct injection and multi-valve gasoline motorcycles.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  •

    4T 15W-50 1L

    14,95€
    Naja 4T 15W-50 oil of 1 litre. Naja 15W50 is the new synthetic lubricant, formulated with highly lubricious synthetic and polymeric bases and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    Characteristic:
    • Viscosity grade 15W-50
    • Density at 20º C, gr/cm 3 0.86
    • Viscosity at 40ºC, cSt 140
    • Viscosity at 100ºC, cSt 18
    • Viscosity index >140
    • Flash point, ºC >190
    • TBN >7.5
    Applications:
    • Naja 15W50, responds to the latest requirements of the new 4-stroke engines, of direct injection and multi-valve gasoline motorcycles.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  •

    4T 5W-40 1L

    14,95€
    Naja 4T 5W-40 oil of 1 litre. Naja 5W40 100% Synthetic is a new synthetic lubricant, formulated with 100% synthetic bases - high lubricity esters and latest generation additives, especially to meet the highest demands in Wear, Consumption and Contamination. Properties:
    • Excellent behavior at low and high temperatures.
    • Reduction of friction and wear, especially at startup.
    • Longer service and oil change intervals.
    • Better dispersancy and detergency with minimal residue formation (lower TBN) and better engine cleanliness.
    • Lower lubricant and fuel consumption.
    • Compatibility with other oils, new gaskets and filters.
    • Better control of emission of polluting gases.
    • Especially suitable for competition motorcycles.
    Characteristic:
    • Viscosity grade 5W-40
    • Density at 20º C, gr/cm3 0.85
    • Viscosity at 40ºC, cSt 88
    • Viscosity at 100ºC, cSt 14
    • Viscosity index >160
    • Flash point, ºC >200
    • TBN 7.5
    Applications:
    • Naja 5W40 100% Synthetic, meets the latest requirements of the new 4-stroke engines, direct injection and multi-valve gasoline motorcycles.
    • It is used in all types of motorcycles equipped with 4-stroke engines with integrated or non-integrated gearbox and oil or dry clutch.
    Specs:
    • JASO: MA / MA1 / MA2
    • API: SN
  •

    AIR FILTER OIL 400ML

    8,95€
    Naja Air Filter Oil Spray 400ml. Naja Air Filter Oil is a special synthetic fluid for foam air filters of all types of motorcycles. It is an excellent fluid, very viscous and sticky that very effectively traps all dust and dirt particles, perfectly fulfilling its mission. Properties:
    • Prevents dust particles from entering the engine.
    • Helps maintain engine power.
    • Extends the life of the engine.
    • Spray packaging allows for easy application.
    Characteristic:
    • Shiny and transparent appearance.
    • Intense blue colour.
    • Density at 20ºC, gr/cm 3 0.84.
    • Viscosity at 40ºC, cSt 600.
    Applications:
    • Before applying the product, clean and allow to dry.
    • Spray the filter inside and out.
    • It can also be applied on the filter box and on the cover.
    • Excessive application does not increase performance.
    Presentation:
    • It is supplied as an aerosol, in 400 ml containers.
  •

    ALL-IN-ONE 400ML

    8,95€
    Naja All-In-One Spray 400ml. Naja All-In-One is a highly additive, low viscosity multi-purpose spray oil. Contains PTFE. Does not contain silicones. Properties:
    • Due to its content in solvents, waxes and oils, it forms a thin and uniform slightly oily film, but it does not retain dust.
    • Unlock.
    • Lubricates.
    • Repels water, even salt water.
    • Corrosion protection.
    • Breaks down scale and makes cleaning easier.
    • Optimum greasing and smoothness characteristics.
    • Natural resistance to oxidation and aging.
    Characteristic:
    • typical colour.
    • Density at 20ºC, gr/cm3 0.85
    • Viscosity at 40ºC, cSt 6
    Applications:
    • Naja All-In-One is applied in cables, rollers, bearings, pulleys, hinges, motors, chain transmissions, cutting tools, in electrical control panels, to repel water and protect against humidity, in connection mechanisms, motor and generator coil brushes, to facilitate the disassembly of seized and rusted parts.
    Precautions for use:
    • Shake the container before use.
    • Do not spray on a flame or incandescent material.
    • Store between 0ºC and 40ºC.
  •

    CHAIN LUBE ON-ROAD 400ML

    8,95€
    Naja Chain Lube On-Road Spray 400ml. Naja chain lube on-road is a highly tacky, synthetic based, white grease formulated with esters, polybutenes and synergistic additives. Contains PTFE. Properties:
    • Contains anti-friction additives, reducing wear to a minimum.
    • It resists high and low temperatures, keeping the lubricating film all its elastic properties.
    • Water resistant.
    • Great power of penetration and protection thanks to its first liquid and then pasty formula.
    • Prevent corrosion.
    • Extends the life of the chain.
    Characteristic:
    • Paste appearance.
    • White color.
    • Dropping point, ºC None.
    • Working temperature, ºC -20 to 200.
    Applications:
    • Naja CHAIL LUBE ON-ROAD is a grease specially formulated for chains with seals or normal, with Oring and X-ring system. Thanks to its special formulation, it reduces wear on the chain, crown and pinion, extending the life of the transmission kit.
    Presentation:
    • It is supplied as an aerosol, in 400 ml containers.
  •

    NAJA CHAIN LUBE OFF-ROAD 400ML

    8,95€
    Naja Chain Lube Off-Road 400 ml. Naja CHAIN LUBE OFF-ROAD is a synthetic based, highly adherent synthetic lubricant formulated with esters, polybutenes and synergistic additives. It can be applied to all types of motorcycles, especially designed for OFF-ROAD use. Properties:
    • Contains anti-friction additives, reducing wear to a minimum.
    • It resists high and low temperatures (-20ºC to +200ºC) keeping the lubricating film all its elastic properties.
    • Repels water, does not retain dirt.
    • Great power of penetration and protection thanks to its first liquid and then pasty formula.
    • Prevent corrosion.
    • Extends the life of the chain.
    Characteristic:
    • Viscous liquid appearance
    • Transparent color
    • Working temperature, ºC -20 to 200
    Applications: Naja CHAIL LUBE OFF-ROAD is a lubricant that is supplied as an aerosol. Specially formulated for chains with seals or normal. For chains with O-ring and X-ring system. Thanks to its special formulation, it reduces wear on the chain, crown and pinion, extending the life of the transmission kit. Presentation: It is supplied as an aerosol, in 400 ml containers.

© Naja | Privacy Policy | Cookies policy | Terms and conditions | WordPress web design: Croma.

Go to Top